# How does a liquid ring vacuum pump work?

**How does a liquid ring vacuum pump work, and where is it the right choice?**

Elmo Rietschle explains that an eccentrically mounted impeller forms a ring of operating liquid that seals the cells between the blades, enables gas handling and carries away the compression heat; the maker calls these pumps ideal when process gases contain moisture, steam load or entrained condensate.

## The working cycle

Speck Pumpen (Circutec, from Roth in Germany) describes the same construction: an eccentrically arranged impeller and a liquid ring as the sealing element, which together with the impeller blades form working chambers of changing volume that create the vacuum. The US EPA WaterSense at Work guide (October 2012) puts it as the vacuum being created by the changing geometry inside the casing as the impeller and liquid ring rotate, and notes that the seal water gains heat and gathers impurities from the gases collected. Circutec says these machines are also known as water ring pumps, liquid ring pumps or liquid ring compressors, and Elmo Rietschle says the liquid ring enables both vacuum and compression operation.

## What limits the vacuum

Elmo Rietschle says the achievable ultimate vacuum is limited by the vapour pressure of the operating liquid: the suction pressure cannot drop below it, and as the liquid temperature increases, the achievable vacuum decreases. For stable vacuum levels the maker advises cooling the operating liquid or using a circuit with a heat exchanger. Its L-BV2 and L-BV5 pumps reach suction pressures up to 33 mbar. Circutec gives suction pressures down to 33 mbar abs., and down to 5 mbar abs. with gas ejectors, and builds both single-stage and two-stage designs.

## Where it is the right choice

- Moist or vapour-laden gas: Elmo Rietschle calls liquid ring pumps ideal when process gases contain moisture, steam load or entrained condensate, wherever other technologies reach their limits due to deposits, corrosion or unstable performance.
- Condensable vapour: the pump can condense vapour within the conveyed gas, which, Elmo Rietschle says, lets it replace gas washers, filters, coolers and exchangers in certain applications; Circutec cites high suction capacity from the condensation of vapours in the liquid ring.
- Explosive or corrosive gas: the EPA guide says a facility removing explosive or corrosive gases might only be able to consider a liquid ring pump; Circutec says suitably designed versions can also handle explosive gases such as hydrogen, and lists ATEX-certified designs.
- Oil in the process: Circutec states oil-free compression, with no oil in the conveyed medium or in the exhaust air.
- Dry, well-defined gas: Elmo Rietschle says dry-running screw or rotary vane pumps can be suitable instead.

## Materials

The Elmo Rietschle Product Guide gives grey cast iron with a ceramic coating as the base material, with a stainless steel version as an option, stainless steel shafts for corrosion resistance, and an internal ceramic coating that keeps the housings from calcifying through fluid deposits. Circutec builds in grey cast iron, brass, bronze, stainless steel, duplex and super duplex stainless steel, Hastelloy and other special materials, chosen by conveyed medium, operating liquid, temperature, corrosion and process conditions. For water use, see [how much seal water a liquid ring pump needs](https://library.ultracontrolo.com/answers/how-much-seal-water-does-a-liquid-ring-pump-need/).

Ultra Controlo distributes and services Elmo Rietschle vacuum pumps and blowers in Portugal as a partner brand, and its UltraCare programme covers preventive and corrective maintenance, original spare parts and emergency support for partner-brand equipment. The Speck Pumpen (Circutec) liquid ring vacuum pumps are also among the partner-brand lines.

### Is a liquid ring vacuum pump oil-free?

Circutec states oil-free compression, with no oil in the conveyed medium or the exhaust air, and Elmo Rietschle calls its compact L-BL2 unit a 100% oil-free pump.

### Why does the operating liquid need cooling?

Elmo Rietschle says the suction pressure cannot drop below the vapour pressure of the operating liquid, which rises with temperature, so it advises cooling the liquid or using a circuit with a heat exchanger for stable vacuum.

## Sources

- [Elmo Rietschle, Liquid Ring Vacuum Pumps and Compressors](https://www.elmorietschle.com/en/liquid-ring/)
- [Elmo Rietschle, Compact Liquid Ring Pump L-BL2](https://www.elmorietschle.com/en/liquid-ring/vacuum-pumps/l-bl2-v/)
- [Elmo Rietschle, Product Guide ER.BP.PG.EN.26.03 (PDF), p. 5](https://azure-na-assets.contentstack.com/v3/assets/blt948736820c6caddf/blt59943408fb8903b9/6a79c297c141c4b40629c129/12426_IR_ER_Product_Guide_ENG_26_3.pdf)
- [Speck Pumpen (Circutec), Liquid ring vacuum pumps](https://www.speck.de/en/products/liquid-ring-vacuum-pumps)
- [Speck Pumpen (Circutec), Flüssigkeitsring-Vakuumpumpen](https://www.circutec.de/produkte_fluessigkeitsring_vakuumpumpe/)
- [US EPA, WaterSense at Work, Section 7.3 Vacuum Pumps (October 2012)](https://www.epa.gov/system/files/documents/2023-05/ws-commercial-watersense-at-work_Section_7.3_Vacuum_Pumps.pdf)
- Ultra Controlo, Industrial 2026 catalogue, pp. 10 and 22

Reviewed: 2026-11-19. Ultra Controlo engineering. https://library.ultracontrolo.com/answers/how-does-a-liquid-ring-vacuum-pump-work/
