# How much oxygen does a fish farm need?

**How much oxygen does an intensive fish farm need, and how is the oxygen supply sized?**

Boyd and co-authors (2017) calculate a feed oxygen demand of slightly more than 1.0 kg of oxygen per kg of feed for common farmed species, and Losordo (2014) gives 0.3 to 1.0 kg of oxygen per kg of feed in recirculating tank systems, depending on how long waste solids stay in the system.

Published aquaculture guidance sizes oxygen supply from the feed rate. This page gives the ratios the sources print; it does not size a plant for a particular farm.

## Oxygen demand of feed

In a 2017 article in the Global Aquaculture Advocate, Claude Boyd, Sirirat Chatvijitkul and D. Allen Davis calculate the potential oxygen demand of feed from the carbon and nitrogen in the feed, minus the carbon and nitrogen retained in the farmed animals. They say it usually will be slightly more than 1.0 kg of oxygen per kg of feed at typical feed conversion efficiency values, and give these values for common species:

| Species | Feed conversion ratio | Oxygen demand (kg O2 per kg of feed) | Oxygen demand (kg O2 per kg of animals produced) |
|---|---|---|---|
| Channel catfish | 2.0 | 1.05 | 2.12 |
| Tilapia | 1.7 | 1.02 | 1.73 |
| Atlantic salmon | 1.3 | 1.05 | 1.36 |
| Rainbow trout | 1.2 | 1.03 | 1.24 |
| Whiteleg shrimp | 1.5 | 1.00 | 1.50 |

The authors say feed conversion efficiency has a rather minor effect on the oxygen demand per kilogram of feed, but a major influence on the amount of feed needed to produce a unit weight of animals. In ponds, they say, usually about 70 to 80 percent of the feed oxygen demand is expressed within the pond itself. An earlier Boyd article (2009) concluded that 1.25 kg of oxygen per kg of feed would seem reasonable for general use, and could be used for most types of warm-water aquaculture.

## Recirculating tank systems

Losordo (2014, Global Aquaculture Advocate) writes that the oxygen a recirculating system needs is largely dictated by the feed rate and by how long waste solids remain in the culture and filtration system. In systems with non-submerged biofilters and quick solids removal, as little as 0.3 kg of oxygen can be consumed for every 1.0 kg of feed added; with submerged biological filters and retained solids, as much as 1.0 kg. If the fish are fed over a shorter period, he says, peak oxygen demand should be estimated.

He adds that in intensive tank-based systems with fish densities above 40 kg/m³, oxygen consumption by the fish and bacteria usually exceeds what typical aeration equipment can dissolve, and that in a typical intensively loaded recirculating system an aeration or oxygenation failure can lead to a total loss of the fish crop in 30 minutes or less unless backup oxygen or aeration is provided.

## Seasonal peaks and backup

Nickerson (2008, Global Aquaculture Advocate) writes that oxygen used in late summer can be more than twice as high as in winter, that buying a generator based on a facility’s maximum consumption could cost much more than buying liquid oxygen, and that liquid oxygen can automatically back up a generator if power is lost or the unit loses capacity. See [oxygen for aquaculture and fish farming](https://library.ultracontrolo.com/industry/oxygen-for-aquaculture/) and [replacing liquid oxygen with VSA](https://library.ultracontrolo.com/industry/vsa-oxygen-to-replace-liquid-oxygen/).

## ULTRAOX VSA

The ULTRAOX VSA datasheet lists aquaculture among the applications of this Ultra Controlo industrial oxygen plant. ULTRAOX VSA delivers 75% to 95% oxygen at 50 kPa, with an additional oxygen booster for higher pressures supplied on demand. Its seven models, ULTRAOX VSA 180 to 2400, deliver 22 to 288 m³/h at 90% and 18 to 240 m³/h at 93%, based on standard cubic metres at 15 °C, 1 atmosphere and 40% relative humidity; the datasheet says other capacities are available under request. The published ratios above give the oxygen a feed rate implies, but matching a plant to a farm also needs the farm’s species, system design and peak demand, which these sources do not supply.

### How much oxygen does 1 kg of fish feed need?

Boyd and co-authors (2017) calculate slightly more than 1.0 kg of oxygen per kg of feed for common species; Losordo (2014) gives 0.3 to 1.0 kg in recirculating tank systems, depending on how long waste solids stay in the system.

### Does feed conversion change the oxygen demand?

Per kilogram of feed only slightly, according to Boyd and co-authors (2017), but it strongly changes how much feed, and so how much oxygen, is needed per kilogram of animals produced.

### Why does a fish farm need backup oxygen?

Losordo (2014) says an aeration or oxygenation failure in a typical intensively loaded recirculating system can lead to a total loss of the fish crop in 30 minutes or less unless backup oxygen or aeration is provided.

## Sources

- [C. E. Boyd, S. Chatvijitkul and D. A. Davis, Understanding the oxygen demand of aquafeeds, Global Aquaculture Advocate (17 April 2017), Global Seafood Alliance](https://www.globalseafood.org/advocate/understanding-oxygen-demand-aquafeeds/)
- [C. E. Boyd, Oxygen demand of aquaculture feed, Global Aquaculture Advocate (1 November 2009), Global Seafood Alliance](https://www.globalseafood.org/advocate/oxygen-demand-aquaculture-feed/)
- [T. M. Losordo, A look at aeration, oxygenation, Global Aquaculture Advocate (2 March 2014), Global Seafood Alliance](https://www.globalseafood.org/advocate/look-at-unit-processes-in-ras-systems/)
- [P. Nickerson, Oxygen sources for aquaculture farms, Global Aquaculture Advocate (1 July 2008), Global Seafood Alliance](https://www.globalseafood.org/advocate/oxygen-sources-aquaculture-farms/)
- [ULTRAOX VSA datasheet, p. 2 and p. 3](https://www.ultracontrolo.com/products/ultraox-vsa)

Reviewed: 2026-11-18. Ultra Controlo engineering. https://library.ultracontrolo.com/answers/how-much-oxygen-does-a-fish-farm-need/
