# Hot gas bypass valve (refrigeration dryer)

In a refrigerant-type non-cycling dryer, the temperature of the air leaving the refrigerant evaporator is controlled by a hot gas bypass valve, according to the 2016 US DOE sourcebook; the ULTRASEC datasheet lists one designed to provide a constant dew point.

The 2016 US DOE sourcebook says refrigerant-type, non-cycling dryers cool the air in a refrigerant-to-air heat exchanger, and that the temperature of the air leaving the refrigerant evaporator is controlled by a hot gas bypass valve. It also says the refrigerated dryer lowers the dew point of the air to the approximate temperature of the air exiting the evaporator, and that to avoid freezing the evaporator temperature should not go below 32 °F.

The ULTRASEC refrigeration dryer datasheet lists a hot gas bypass valve developed with a new technology designed to provide a constant dew point, and gives as an advantage a constant dew point at different pressure loading conditions.

## Sources

- [US DOE and Compressed Air Challenge, Improving Compressed Air System Performance, 3rd edition (2016): Introduction, p. 12 (PDF p. 17)](https://www.energy.gov/sites/prod/files/2016/03/f30/Improving%20Compressed%20Air%20Sourcebook%20version%203.pdf)
- [ULTRASEC datasheet, p. 2](https://www.ultracontrolo.com/products/ultrasec)

Reviewed: 2026-11-18. Ultra Controlo engineering. https://library.ultracontrolo.com/glossary/hot-gas-bypass-valve/
