# ISO 10637:2018 Dentistry: central suction source equipment

ISO 10637:2018, Dentistry, Central suction source equipment, specifies requirements and test methods for stationary, electrically powered central suction source equipment; HTM 02-01 (2026), the NHS England guidance, uses it to class dental vacuum systems by the air flow at each cannula connector.

## What the standard covers

According to the catalogue entries of the Estonian standards body (EVS) and Standards Ireland, ISO 10637:2018 specifies requirements and test methods for stationary, electrically powered central suction source equipment. Both entries describe the scope as including centrally located amalgam separators and air/water separators, and as setting out the information the manufacturer must provide on performance, installation, operation and maintenance.

- Not covered: portable suction source equipment and air/water venturi suction source equipment.
- Not covered: requirements for facility and exhaust piping systems, or for treatment room equipment.

## Editions and national adoptions

Standards Ireland lists ISO 10637:2018 with a publication date of 17 May 2018 and the status Current. EVS lists EVS-EN ISO 10637:2018, valid from 4 July 2018, with the base documents ISO 10637:2018 and EN ISO 10637:2018. HTM 02-01 (2026) lists it as BS EN ISO 10637:2018 in its references.

## How HTM 02-01 uses it

HTM 02-01 (2026) Part A, 11.7, says a classification of dental vacuum systems by air volume flow rate is given in BS EN ISO 10637. High volume systems have an air intake of more than 250 L/min at each cannula connector of the largest bore operating hose when operated at full power and in accordance with the manufacturer's instructions; medium volume systems have an air intake between 90 and 250 L/min at the cannula connector. HTM 02-01 says medium volume systems are not generally specified or used in the UK and are not covered in the HTM (11.8), and that low volume systems, those less than 90 L/min, are not used in dentistry (11.9). The sizing of a high volume system is explained in [what a dental central suction system is](https://library.ultracontrolo.com/answers/what-is-a-dental-central-suction-system/).

## ULTRAVAC DENTAL

The ULTRAVAC DENTAL product page describes central suction for dental clinics and colleges, wet aspiration. The page does not cite ISO 10637, so no statement about conformity to it is made here. For how the medical and dental systems differ, see [medical vacuum vs dental vacuum](https://library.ultracontrolo.com/compare/medical-vacuum-vs-dental-vacuum/), and for amalgam separation see does a dental suction system need an amalgam separator.

## Sources

- [EVS, EVS-EN ISO 10637:2018 Dentistry, Central suction source equipment (catalogue entry)](https://www.evs.ee/en/evs-en-iso-10637-2018)
- [Standards Ireland (NSAI), ISO 10637:2018 Dentistry, Central suction source equipment (shop entry)](https://shop.standards.ie/en-ie/standards/iso-10637-2018-594097_saig_iso_iso_2674750)
- [NHS England, HTM 02-01 Medical gas pipeline systems (2026), Part A, paragraphs 11.7 to 11.9 and references](https://www.england.nhs.uk/wp-content/uploads/2016/05/health-technical-memorandum-02-01-medical-gas-pipeline-systems-part-a-design-installation-validation-verification-aug-2026.pdf)
- [ULTRAVAC DENTAL product page](https://www.ultracontrolo.com/products/ultravac-dental)

Reviewed: 2026-11-18. Ultra Controlo engineering. https://library.ultracontrolo.com/standards/standard-iso-10637/
