Medical gas library

Medical air

Oil/water separator

Under HTM 02-01 (2026), the NHS England guidance, the oil/water separator is the means of separating oil from compressor condensate, which the guidance calls essential where oil-lubricated compressors are used.

HTM 02-01 (2026) says that, when it validates a medical air plant with oil-cooled or lubricated compressors, an oil-water separator system must be in place and must be inspected for compliance and operation. The guidance records this inspection on form B9.

Ultra Controlo lists an ULTRASEP oil/water separator on ULTRAAR ME, which uses oil lubricated ULTRASCREW compressors: sizes ULTRASEP 0 to 4, for 120 to 1,200 m³/h, with a maximum oil adsorption of 2 to 15 L. The ACIH hospital industrial air plant has an ULTRASEP on its ULTRASCREW FSD version. Limits for discharging condensate are set locally and are not covered here.

Sources

Ultra Controlo figures come from its technical datasheets. Third-party facts were read at the source on the date shown.

Reviewed: · Ultra Controlo engineering · Markdown version

Related