Vacuum and AGSS
Elmo Rietschle L-Series liquid ring pumps: models and limits
Elmo Rietschle says its L-Series liquid ring vacuum pumps suit wet processes, where the gas carries moisture, steam or condensate, and that the ultimate vacuum is limited by the vapour pressure of the operating liquid; its selection table lists the L-BV2, L-BV5, L-BV7 and L-BL2, from 25 to 590 m³/h.
What the pumps are for
Elmo Rietschle writes that liquid ring vacuum pumps are ideal when process gases contain moisture, steam load or entrained condensate. It describes the principle as an eccentrically mounted impeller that forms a liquid ring, which seals the cells between the blades and dissipates compression heat through the operating liquid. The manufacturer says this technology is typically less sensitive to entrained liquid or fluctuating loads than many dry-running concepts.
What limits the vacuum
The manufacturer says the achievable ultimate vacuum is limited by the vapour pressure of the operating liquid: the suction pressure cannot drop below the vapour pressure of the liquid used. As the operating liquid temperature increases, vapour pressure rises and the achievable ultimate vacuum decreases. For stable vacuum levels it recommends cooling the operating liquid or using a circuit with a heat exchanger, and for a very deep ultimate vacuum it says to verify whether the vapour pressure limit of the operating liquid is acceptable.
Liquid management
Because the operating liquid plays a central role, Elmo Rietschle says proper liquid management is essential: separators, circulation, replenishment and treatment where required. It adds that the expelled liquid can be recirculated using standardized circuit units, reducing water usage and operational costs.
Models in the selection table
| Model | Type | Flow rate (m³/h) | Note on the page |
|---|---|---|---|
| L-BV2 | liquid ring vacuum pump | 27 to 145 | suction pressure up to 33 mbar |
| L-BV5 | liquid ring vacuum pump | 90 to 590 | suction pressure up to 33 mbar |
| L-BV7 | liquid ring vacuum pump | 27 to 145 | energy-efficient design |
| L-BL2 | compact system solution | 25 to 275 | ready to install, no additional water required |
Materials and compressors
The manufacturer lists a ceramic coating that prevents lime scaling and a monobloc design that prevents deposits and metal contact. Its L-Series liquid ring compressors are described with reinforced shafts, long-life bearings and high water carryover tolerance. The applications named on the page are environmental engineering, food and beverage, lifting and handling, packaging and plastics.
When another technology fits
Elmo Rietschle says alternative technologies, such as dry-running screw or rotary vane, can be suitable when the gas stream is dry and well-defined. See screw vacuum pumps and rotary vane vacuum pumps.
In Portugal
In Portugal, the Ultra Controlo Industrial 2026 catalogue (pp. 10, 11 and 22) lists Elmo Rietschle liquid-ring vacuum pumps, in stainless steel and ceramic and described as robust in harsh conditions, among its partner-brand equipment, and UltraCare covers preventive maintenance, corrective assistance and original spare parts for partner brands (p. 22).
More questions
What limits the vacuum of a liquid ring pump?
Elmo Rietschle says the suction pressure cannot drop below the vapour pressure of the operating liquid, so a warmer liquid gives a weaker ultimate vacuum.
Can an L-Series pump handle moist gas?
The manufacturer says liquid ring vacuum pumps are ideal when process gases contain moisture, steam load or entrained condensate.
Sources
- Elmo Rietschle, Liquid Ring Vacuum Pumps and Compressors
- Ultra Controlo, Industrial 2026 catalogue, pp. 10, 11 and 22
Ultra Controlo figures come from its technical datasheets. Third-party facts were read at the source on the date shown.