Industry
Thomas gas and liquid diaphragm pumps: working principle and uses
According to Thomas, diaphragm pumps, also called membrane pumps, are reciprocating positive displacement pumps in which a flexible diaphragm moved by a conrod draws the medium in on the downstroke and expels it on the upstroke. Thomas says they are oil-less and can run dry.
Working principle
Thomas says the diaphragm in the pump head is moved up and down by a conrod and an eccentric on the motor shaft. Internal valves in the pump head act as check valves and control the direction of flow. Thomas adds that membrane pumps suit use as a vacuum pump or as an air compressor, and that its models come with AC or DC drives, in single and multiple head versions that can be configured in series or in parallel.
Gas diaphragm pumps and compressors
- Main features listed by Thomas: low sound level, high efficiency and gas tightness, operational water vapour tolerance, working point controllability and a very good size to performance ratio.
- Made from durable plastic or corrosion-resistant coated aluminium, with a choice of pump head and elastomer materials such as PPS (Ryton) or FKM (Viton).
- Flow from 0.3 l/min to 91 l/min, end vacuum of 990 mbar and pressure up to 3.0 bar, as Thomas gives them for its gas diaphragm range.
- Typical uses named by Thomas: handheld or portable gas detectors and analysers, dental autoclaves, negative pressure wound therapy devices, laboratory and life-science instruments.
Liquid diaphragm pumps
Thomas says gas and liquid diaphragm pumps can look alike from outside, but liquids cannot be compressed, so they create higher forces on the pump components and induce pulsation. Liquid pump designs therefore use smaller diaphragm strokes, stiffer diaphragm materials and more robust bearings. To reduce pressure pulses, Thomas says it added a resonating diaphragm.
- Flow rates from 0.18 l/min to 1.8 l/min.
- Pump components in a material chosen for the liquid, such as EPDM, FKM, PTFE or FFKM.
- Self-priming and oil-less; Thomas says its liquid diaphragm pumps with brushless DC motors can reach lifetimes of over 10,000 hours.
- Uses named by Thomas: ink handling in digital inkjet printers and fluid handling in in-vitro diagnostic equipment such as haematology analysers.
In Portugal
In Portugal, Ultra Controlo distributes and services Thomas pumps and compressors, one of the five partner brands in its Industrial 2026 catalogue, with genuine parts and UltraCare. Tell Ultra Controlo the series or the job and it replies with the model. The Industrial 2026 catalogue lists Thomas liquid diaphragm pumps and gas diaphragm pumps. To choose between a diaphragm and a peristaltic pump, see diaphragm pump or peristaltic pump.
More questions
Can a Thomas diaphragm pump run dry?
Thomas says its diaphragm pumps are oil-less and can run dry.
Are Thomas diaphragm pumps used for vacuum or pressure?
Thomas says they suit pressure, vacuum or a combination of the two.
Sources
- Thomas, Diaphragm pump technology
- Ultra Controlo, Industrial 2026 catalogue, pp. 10 and 15
- Ultra Controlo, Thomas page (Industrial)
Ultra Controlo figures come from its technical datasheets. Third-party facts were read at the source on the date shown.
Related
- IndustryThomas pumps and compressors in Portugal
- ComparisonsDiaphragm pump or peristaltic pump: how Thomas tells them apart
- IndustryThomas peristaltic pumps and tubes: how they work and what wears
- IndustryThomas linear diaphragm pumps: uses, features and limits
- IndustryThomas WOB-L piston pumps: how they work and where they are used