ULTRAOX SC: specifications and models

The plant is modular, runs automatically in cascade and is supplied pre-wired and factory tested.

Key facts from the datasheet

The ULTRAOX SC plant supplies medical oxygen at a purity of 94% (plus or minus 1%).
The stated purity tolerance is plus or minus 1%.
The basic configuration uses one or more oil-less ULTRACECO compressors.
The datasheet describes the ULTRACECO compressor as an oil-less air compressor of Class 0.
The datasheet states that the ULTRAOX SC has one service at 10,000 hours.
The plant has one or two oxygen analysers with a zirconium oxide probe.
The plant is modular and its flow capacity can be increased progressively, so no total back-up compressor is needed.
Compressors switch and generators start in cascade to keep a continuous oxygen supply.
The equipment is parameterised and tested in the factory before delivery.
Particles in the oxygen are below 1 µm.
Oil in fluid phase is listed as exempt.
CO2 is below 300 ppm.
CO is below 5 ppm.
SO2 is below 1 ppm.
NOx is below 2 ppm.
The working dew point is minus 46 °C.
The quality values are given as residual contents in initial operation conditions, with oxygen quality per the European Pharmacopoeia.

MODEL	CAPACITY O2 per unit (l/min)	CAPACITY O2 per unit (m3/h)	COMPRESSOR (per unit) KW	INLET PRESSURE (AC) bar	OUTLET PRESSURE (O2) bar	ULTRACON
3	5,3	0,318	2,2	7,5	6	1
8	13	0,777	2,2	7,5	6	2
12	17,9	1,072	4	7,5	6	3
30	51,7	3,1	5,5	7,5	6	4
50	76,7	4,6	7,5	7,5	6	5
70	108,3	6,5	13	7,5	6	6
90	133,3	8	13	7,5	6	7
100	158,3	9,5	15	7,5	6	8
120	206,7	12,4	22,5	7,5	6	9
180	303,3	18,2	37,5	7,5	6	10
260	436,7	26,2	52,5	7,5	6	11
370	608,3	36,5		7,5	6	12
440	725	43,5	75	7,5	6	13
560	928,3	55,7	97,5	7,5	6	14

Values as printed in the Ultra Controlo datasheet. Ultra Controlo engineering confirms the configuration for each project.