Medical gas library

Industry

ULTRASCREW FSD, VSD and DS VSD compared

What is the difference between ULTRASCREW FSD, VSD and DS VSD?

Short answer

The ULTRASCREW pages on ultracontrolo.com describe FSD as the fixed speed oil lubricated screw compressor, VSD as its direct drive variable speed version, and DS VSD as a two-stage screw compressor with a variable speed drive for industrial compressed air.

The three versions share a name and differ in how they follow air demand. FSD and VSD are the two versions of the oil lubricated ULTRASCREW rotary screw compressor, and DS VSD has its own product page: two-stage screw compression with a variable speed drive that follows air demand, for industrial operations where demand fluctuates.

Side by side

ULTRASCREW FSDULTRASCREW VSDULTRASCREW DS VSD
SpeedFixed speedDirect drive and variable speed control, at constant output pressure over 5 to 14 bar, with a smooth startVariable speed drive that follows air demand
CompressionOil lubricated rotary screwOil lubricated rotary screwTwo-stage rotary screw, direct-coupled, with direct power transmission and low compression ratios
Motor and startingStar delta starterIP54 motor with Class F insulationNot stated on its product page
Cooling and designTemperature controlled axial cooling fan, compact footprint with easy servicing, design optimised for low noiseAir/oil cooling with cyclonic separator and a pressure relief valveOptional integrated dryer; optional oil/water exchanger for heat recovery as hot water or heated air
ControlMicroprocessor controllers with communication capabilities (ULTRASCREW)Microprocessor controllers with communication capabilities (ULTRASCREW)LED display with integrated driver and controller, Modbus TCP, dual PID control of pressure and temperature; several compressors can run as a group without an external master controller
Where it is usedCompressor of the ULTRAAR ME medical air plantCompressor of the ULTRAOX ST oxygen plantIndustrial compressed air, as presented on its product page
Sizes publishedULTRASCREW 4 FSD to ULTRASCREW 132 FSD, 4 to 132 kW, 22 to 1,170 Nm³/h at 10 bar (ULTRAAR ME datasheet, 2026)ULTRASCREW 5 to ULTRASCREW 315, at 10 bar (ULTRAOX ST datasheet, 2026)No sizes or capacities on its product page

The ULTRASCREW product page answers the FSD and VSD question in one line: FSD runs at fixed speed with a star delta starter, and VSD uses direct drive and variable speed control.

Oil-free or not

ULTRASCREW is not oil-free: the product page describes an oil lubricated rotary screw compressor and refers to ULTRACECO for oil-free compression. See oil-injected or oil-free screw compressors. The DS VSD product page does not state the lubrication type.

Where to go next

For the product pages, see ULTRASCREW and ULTRASCREW DS VSD. For the principle behind speed control, see variable speed or fixed speed compressors, and for running compressors as a group, how several compressors are controlled together. The plants that use the two ULTRASCREW versions are ULTRAAR ME and ULTRAOX ST.

More questions

Which ULTRASCREW is used in ULTRAOX ST oxygen plants?

The VSD version, according to the ULTRASCREW product page and the ULTRAOX ST datasheet (2026), which lists ULTRASCREW 5 to ULTRASCREW 315 at 10 bar.

Which ULTRASCREW is used in ULTRAAR ME medical air plants?

The fixed speed FSD version, from ULTRASCREW 4 FSD to ULTRASCREW 132 FSD in the ULTRAAR ME datasheet (2026).

Is ULTRASCREW DS VSD a two-stage compressor?

Yes. Its product page describes a direct-coupled two-stage screw block with a variable speed drive that follows air demand.

Sources

Ultra Controlo figures come from its technical datasheets. Third-party facts were read at the source on the date shown.

Reviewed: · Ultra Controlo engineering · Markdown version

Related