Medical gas library

Service and projects

What maintenance do wastewater aeration blowers need?

What preventive maintenance do wastewater aeration blowers need?

Short answer

The US EPA (2010) says the air intakes of aeration blowers are typically fitted with filters to protect the blowers and diffusers, and that positive displacement blowers need more maintenance than the other types in its table; Elmo Rietschle gives up to 20,000 hours between services for its G-Series side channel blowers.

The routine

  • Inlet filters: the US EPA report on energy conservation in wastewater treatment (September 2010) says air intake systems are typically equipped with filters to protect blowers and diffusers from airborne particulates. Elmo Rietschle says side channel blowers prefer clean, dry gases and that inlet conditions, with filters and particle protection, should be properly designed.
  • Oil: in rotary lobe machines such as the Elmo Rietschle R-VWP the compression chamber is dry, but the gearbox and bearings are oil-lubricated; Elmo Rietschle describes its side channel blowers as dry running, with contact-free compression.

Intervals the makers publish

The makers' figures for their own machines; the manual of the installed model sets the plan.
MachineInterval as the maker states itWhere
Elmo Rietschle G-Series side channel blowersUp to 20,000 hours between servicesG-Series web page
Elmo Rietschle G-BH2 side channel blower40,000 hours maintenance freeG-BH2 web page

Blower type changes the workload

In the EPA table of aeration blower types, taken from WEF 2009 and WEF and ASCE 2010, positive displacement blowers, most commonly two counter-rotating shafts with 2- or 3-lobed impellers, require more maintenance than the other types and can be noisy, with enclosures commonly used for noise control. The same report says positive displacement blowers can use VFDs to modulate air flow.

Service in Portugal

Ultra Controlo distributes and services Elmo Rietschle vacuum pumps and blowers in Portugal as a partner brand. UltraCare, its technical support programme, covers preventive and corrective maintenance, original spare parts and emergency support for partner-brand equipment, with scheduled preventive maintenance plans adapted to each installation.

More questions

How often should a side channel blower be serviced?

Elmo Rietschle gives up to 20,000 hours between services for its G-Series and 40,000 hours maintenance free for the G-BH2.

Do aeration blowers need inlet filters?

The US EPA report of September 2010 says air intake systems are typically equipped with filters to protect blowers and diffusers from airborne particulates.

Sources

Ultra Controlo figures come from its technical datasheets. Third-party facts were read at the source on the date shown.

Reviewed: · Ultra Controlo engineering · Markdown version

Related