Medical gas library

Industry

Preventive vs corrective compressor maintenance

Short answer

The EU-OSHA OSHwiki describes corrective maintenance as work carried out after a failure to eliminate its source, and preventive maintenance as predetermined, at predefined time intervals, or condition-based, from observing the equipment; for compressors, the Compressed Air Challenge (May 2026) says manufacturers' maintenance schedules should be followed strictly.

OSHwiki, the knowledge base of the European Agency for Safety and Health at Work (EU-OSHA, updated June 2024), starts from the European standard EN 13306, under which maintenance is a combination of all technical, administrative and managerial actions during the life cycle of an item, intended to retain it in, or restore it to, a state in which it can perform the required function. It says this implies a differentiation between preventive and corrective maintenance.

Source: EU-OSHA, OSHwiki (updated 15 June 2024).
AspectPreventive maintenanceCorrective maintenance
When it is donePredetermined, at predefined time intervals, or condition-based, from observations of the condition of the equipmentAfter a failure has occurred, to eliminate the source of the failure
FormsCondition-based maintenance is either predictive, using actual equipment condition rather than average or expected life statistics, or non-predictiveIt can be carried out immediately after the failure (remedial maintenance, such as emergency interventions)

OSHwiki adds that the unforeseen nature of remedial maintenance makes it a high-risk activity, especially under time pressure, as in a breakdown.

What compressed air guidance asks for

The Compressed Air Challenge (CAC) Fact Sheet #5 (May 2026) says industrial compressed air systems require periodic maintenance to operate at peak efficiency and minimize unscheduled downtime, and that manufacturers' inspection, maintenance and service schedules should be followed strictly. In many cases, it says, it makes sense to maintain equipment more frequently than the manufacturers' intervals, which are primarily designed to protect equipment. Its condition check is benchmarking: if power use at a given pressure and flow goes up, the system's efficiency is degrading.

The 2016 DOE sourcebook described control panel data, frequent inspections and log sheets as required to avoid unscheduled system shutdowns and to use the principles of preventive and predictive maintenance, and recommended recording the dates of all maintenance and repairs with a list of the parts replaced or serviced.

In maintenance tenders

Public tenders can price the two separately. The Cogersa tender in Asturias (TED 14136-2026, published 9 January 2026, tenders due by 9 February 2026, closed) scored corrective maintenance labour and preventive maintenance labour as separate price criteria, and the ENSAM tender for its Lille campus (TED 167490-2026, published 11 March 2026, tenders due by 15 April 2026, closed) covered preventive and corrective maintenance of air compressors and their ancillary equipment.

For the maintenance offer of Ultra Controlo, see does Ultra Controlo offer maintenance contracts.

More questions

Is predictive maintenance a kind of preventive maintenance?

In the OSHwiki classification, preventive maintenance is predetermined or condition-based, and condition-based maintenance is either predictive or non-predictive.

How often should a compressor be serviced?

CAC Fact Sheet #5 (May 2026) says to follow the manufacturer's inspection, maintenance and service schedules strictly, and that in many cases maintaining more frequently makes sense.

Sources

Ultra Controlo figures come from its technical datasheets. Third-party facts were read at the source on the date shown.

Reviewed: · Ultra Controlo engineering · Markdown version

Related