Medical gas library

Oxygen and PSA

Multistage compression and intercooling

In the US Department of Energy's compressed air sourcebook, multiple stages of compression are used either for improved efficiency at a given pressure or to achieve higher pressures, and most multi-stage compressors use intercoolers that remove the heat of compression between the stages.

The sourcebook (Improving Compressed Air System Performance, third edition) calls an intercooler a heat exchanger and says intercooling affects the overall efficiency of the machine. For single-acting reciprocating air compressors it adds that two-stage and multi-stage designs include inter-stage air-cooling to reduce air temperatures to the second stage, for improved efficiency and durability. It is a guide to air compressors, so it explains the principle and does not describe the design of an oxygen booster.

Where WHO mentions stages for a filling booster

WHO's technical specifications of 31 December 2024, in the cylinder filling station table, list the following for the booster compressor:

  • Gauges that display the pressure of each stage of compression, and the operating temperature of each stage as optional.
  • Safety relief valves at each stage of compression.
  • Automatic shut-off at the pre-set fill pressure, and an automatic shut-off for breach of any stage temperature reference point, listed as optional and recommended.

Checking stage pressures

The DOE sourcebook's maintenance checklist for water-cooled, double-acting reciprocating compressors includes checking the intercooler pressure on multi-stage machines and referring to the manufacturer's manual if the pressure is not as specified. For how stage readings are used to follow a booster's performance, see why an oxygen booster fills cylinders slowly.

ULTRAFIL

The ULTRAFIL datasheet (2026) describes the booster's thermal protection as staged and lists high temperature and overpressure shutdowns among its key features. It does not state the number of compression stages.

More questions

Why do multistage compressors have intercoolers?

The DOE sourcebook says intercoolers remove the heat of compression between the stages and that intercooling affects the overall efficiency of the machine.

What does WHO ask for at each stage of a filling booster?

WHO (2024) lists pressure gauges and safety relief valves at each stage of compression, with the operating temperature of each stage as optional.

Sources

Ultra Controlo figures come from its technical datasheets. Third-party facts were read at the source on the date shown.

Reviewed: · Ultra Controlo engineering · Markdown version

Related