Service and projects
Gardner Denver compressor spare parts in Portugal
The Ultra Controlo Industrial 2026 catalogue lists Gardner Denver among its five partner brands, and its UltraCare programme includes original spare parts for partner-brand equipment.
What the manufacturer documents for its lubricated screw compressors
On the ESM(e)/VS 30 to 132 kW series, Gardner Denver uses a semi-integrated airend with an integrated oil filter and oil regulation valve, which it says means fewer external components and pipework and easier maintenance. The same page names AEON 9000 SP synthetic lubricant as standard, and the enclosure side doors are hinged and removable for access to all service points. The 30 to 45 kW and 90 to 132 kW brochures give an oil carryover below 3 ppm from the separator filtration, which the 90 to 132 kW brochure describes as two-stage. For the ranges themselves, see Gardner Denver ESM and VS compressors.
The FourCore ESM/VS 110FC to 290FC series is equipped as standard with iConn, which Gardner Denver describes as a real-time monitoring service for the compressed air system, according to its FourCore brochure.
Filter elements
Gardner Denver GDF filters remove water and oil aerosols, dirt, solid particles, rust, pipescale and micro-organisms. The 2026 filter brochure sets out the benefits of annual filter element changes; a pressure drop indicator shows when element replacement is recommended, and a time strip label marks when to change the element on GDF grades. The grades and the maximum remaining oil content the brochure gives at 21 °C:
| Grade | Purpose | Manufacturer's figure |
|---|---|---|
| G | general purpose protection | particles down to 0.1 micron; oil aerosol 0.03 mg/m³ |
| H | high efficiency removal, preceded by grade G | particles down to 0.01 micron; oil aerosol 0.01 mg/m³ |
| V | activated carbon, preceded by grade H | oil vapour and odour removal; remaining oil below 0.003 mg/m³ |
| P | dust filtration | dust particles down to 1 micron |
The same brochure says the G and H grade filters and the water separators have an internal float drain, while the P and V grades have a manual unloader.
Parts and service in Portugal
UltraCare assistance is delivered by certified, factory-trained technicians of its own team, not a call centre or a network of subcontractors (p. 23).
For Gardner Denver compressors in Portugal, the Ultra Controlo Industrial 2026 catalogue lists Gardner Denver among its partner brands (p. 10), and UltraCare covers preventive maintenance, corrective assistance and original spare parts for partner brands (p. 22).
More questions
Does Ultra Controlo supply original Gardner Denver parts?
Its Industrial 2026 catalogue lists Gardner Denver as a partner brand, and UltraCare includes original spare parts for partner brands.
How often does Gardner Denver recommend changing filter elements?
Its 2026 filter brochure sets out the benefits of annual filter element changes, with a pressure drop indicator to show when replacement is recommended.
Sources
- Ultra Controlo, Industrial 2026 catalogue, pp. 10, 22, 23 and 24
- Gardner Denver, ESM VS 30-132 Series lubricated screw air compressors (EMEIA)
- Gardner Denver, ESM30 to 45e brochure (PDF)
- Gardner Denver, ESM90 to 132 brochure (PDF)
- Gardner Denver, ESM 110FC - 290FC / VS 110FC - 290FC FourCore brochure, G8 27.EN.10/23.CI (PDF)
- Gardner Denver, Air Compressor Filters (EMEIA)
- Gardner Denver, High efficiency compressed air filtration & water separation, GDF Series & GDWS Range, G8 07.EN.04/26.CI (PDF)
Ultra Controlo figures come from its technical datasheets. Third-party facts were read at the source on the date shown.
Related
- IndustryGardner Denver compressors in Portugal
- IndustryGardner Denver ESM and VS oil-lubricated screw compressors
- IndustryGardner Denver oil-free screw compressors: Class 0 air in Portugal
- IndustryDryers and filters for industrial compressed air
- IndustryElmo Rietschle spare parts in Portugal: vanes, filters and kits