Standards
ISO 8573-3: how humidity in compressed air is measured
ISO 8573-3:1999, Compressed air, Part 3: Test methods for measurement of humidity, is the ISO standard that gives guidance on selecting from the available suitable methods for measuring humidity in compressed air and specifies the limitations of the various methods; it covers water vapour only.
Edition and status
ISO 8573-3:1999 is edition 1, published in June 1999, with 14 pages, prepared by ISO/TC 118/SC 4. On 19 November 2026 ISO lists it as published at stage 90.60, close of review, and says it was last reviewed and confirmed in 2017 and that the version remains current.
What it covers
ISO’s abstract says the standard specifies sampling techniques, measurement, evaluation, uncertainty considerations and reporting for the air contamination parameter humidity. It also gives guidance for the conversion of humidity statements to the standard format.
What it leaves out
The abstract says the standard does not provide methods for measurement of water content in states other than vapour. Liquid water is the subject of ISO 8573-9, whose abstract says water vapour content is dealt with in ISO 8573-3. The classes of air purity themselves are set in ISO 8573-1.
On Ultra Controlo datasheets
The ULTRADRY datasheet gives a pressure dew point range of −40 °C to −70 °C. It does not cite ISO 8573-3 and gives no humidity measurement result, so this page makes no claim about how that dew point is measured.
More questions
Does ISO 8573-3 cover liquid water in compressed air?
No. ISO’s abstract says it does not provide methods for water content in states other than vapour; ISO 8573-9 covers liquid water content.
Is ISO 8573-3 still current?
ISO’s page of 19 November 2026 says it was last reviewed and confirmed in 2017 and that the version remains current.
Sources
- ISO 8573-3:1999 Compressed air, Part 3: Test methods for measurement of humidity (abstract and general information, iso.org)
- ULTRADRY datasheet, p. 2
Ultra Controlo figures come from its technical datasheets. Third-party facts were read at the source on the date shown.