Medical gas library

Standards

ISO 7183: compressed-air dryers, specifications and testing

ISO 7183:2007 specifies the performance data that are necessary to state, and the test methods, for adsorption, membrane and refrigeration compressed air dryers working at more than 50 kPa (0.5 bar) and up to 1,600 kPa (16 bar) gauge pressure, according to its iso.org abstract.

What the standard covers

According to its iso.org abstract, ISO 7183:2007 specifies the performance data that are necessary to state and applicable test methods for different types of compressed air dryers. It applies to dryers working with an effective (gauge) pressure of more than 50 kPa (0.5 bar), but less than or equal to 1,600 kPa (16 bar), and includes adsorption dryers, membrane dryers, refrigeration dryers (including drying by cooling) or a combination of these. A description is given of the principles of operation of the dryers within its scope.

What it gives test methods for

  • Pressure dew point, flow rate, pressure drop, compressed-air loss, power consumption and noise emission (the dryer parameters its abstract lists).
  • Partial-load tests for determining the performance of energy saving devices or measures.
  • The mounting, operating and loading conditions of dryers for the measurement of noise.

What it does not cover

The abstract says ISO 7183:2007 is not applicable to absorption dryers, drying by over-compression and integral dryers.

Edition and status

On 18 November 2026 iso.org lists ISO 7183:2007 as Edition 2, published in December 2007, 21 pages, prepared by ISO/TC 118/SC 4. It says the publication was last reviewed and confirmed in 2011, so this version remains current, and it shows the stage as International Standard under systematic review (90.20). Check iso.org before fixing the edition in a specification.

More questions

Does ISO 7183 cover adsorption (desiccant) dryers?

Yes. According to its iso.org abstract, ISO 7183:2007 includes adsorption dryers, membrane dryers, refrigeration dryers or a combination of these.

Is ISO 7183:2007 still the current edition?

On 18 November 2026 iso.org lists it as published, last reviewed and confirmed in 2011, so this version remains current, and shows it under systematic review.

Sources

Ultra Controlo figures come from its technical datasheets. Third-party facts were read at the source on the date shown.

Reviewed: · Ultra Controlo engineering · Markdown version

Related