Industry
Which high-pressure pumps are used for industrial cleaning?
Which high-pressure pumps are used for industrial cleaning and washdown?
Short answer
Speck Triplex lists high-pressure plunger pumps for central cleaning systems in dairies and slaughterhouses and for descaling in rolling mills and the steel industry, and says it builds complete high-pressure units to customer specification.
Why plunger pumps
For high-pressure, low-flow duty, the US Department of Energy pumping sourcebook (2nd edition, 2006) says positive displacement pumps are usually more effective than centrifugal pumps, which can be designed for high pressure, usually with multiple stages, but tend to be comparatively expensive. Plunger pumps are the positive displacement type that Speck Triplex builds for cleaning; see how a plunger pump works. The manufacturer's application table names the series for each job:
| Application | Where | Speck Triplex series |
|---|---|---|
| Central cleaning systems | Dairies, slaughterhouses | P30 to P52, NP25, NP30 |
| Descaling | Rolling mills, steel industry | P50, P62 to P71, P76, P80 |
Complete units
Speck Triplex says complete high-pressure units and pump systems with its plunger pumps are manufactured to customer specification for applications with liquid media, and its application examples include a mobile high-pressure cleaning unit, a high-pressure cleaning unit for a malthouse or brewery and a KEG washing system unit. Unit versions in brass, nodular cast iron, bronze, seawater-resistant NiALBz, or stainless steels 1.4301 (AISI 304) and 1.4571 (AISI 316) for aggressive liquids are possible.
The liquid and the temperature
The manufacturer describes its standard P-series pumps as suitable for clean water and other non-aggressive or non-abrasive media with a specific weight similar to water, and says suitability must be checked, taking pump performance and temperature into account, before any other medium is pumped. A hot water version is listed for media up to 105 °C, and special seals such as Viton, Teflon, FFKM or EPDM are offered for special media such as hydraulic oils, water glycols or mineral oils, subject to a suitability check.
Valves and accessories around the pump
The DOE sourcebook explains that positive displacement pumps push fluid into the discharge line irrespective of backpressure, so pressure builds if the flow is completely obstructed downstream, and that they are usually installed with pressure relief valves. Speck Triplex says it produces pressure and discharge valves to suit its pump performances, and its tables recommend an unloader for many pumps.
For the cleaning side, the Speck Triplex accessory lists include:
- spray guns and lances, nozzles, nozzle holders and turbo nozzles;
- screw couplings, couplings and fittings, syphon injectors and foam injectors;
- valves, filters and pressure accumulators, pressure switches and pressure gauges;
- brushes, hoses and hose reels;
- floor cleaners, tank cleaners, sludge removers and sand blasting equipment.
Safety standard for water jet machines
EN 1829-1:2021 contains safety-related requirements for high pressure water jet machines in which pumps are used to generate pressure, for cleaning, surface preparation, material removal, readjustment of concrete and cutting. According to the scope published by the Estonian national standards body (EVS), it applies to mobile and fixed machines whose maximum allowable working pressure is above the upper limit of EN 60335-2-79:2012, currently 35 MPa, and high pressure cleaners dealt with in EN 60335-2-79 are outside it. The same scope says EN 1829-1 and EN 1829-2 together give the full requirements.
Ultra Controlo distributes and services Speck Triplex high-pressure pumps in Portugal as a partner brand, and its UltraCare programme covers preventive and corrective maintenance, original spare parts and emergency support for partner-brand equipment.
More questions
Which Speck Triplex pumps are listed for central cleaning systems?
The manufacturer's application table lists the P30 to P52 series and the NP25 and NP30 for central cleaning systems in dairies and slaughterhouses.
Does EN 1829-1 cover every pressure washer?
No. Its published scope covers machines above the upper limit of EN 60335-2-79:2012, currently 35 MPa, and leaves out the high pressure cleaners dealt with in EN 60335-2-79 and EN 60335-2-54.
Sources
- US Department of Energy and Hydraulic Institute, Improving Pumping System Performance: A Sourcebook for Industry, 2nd edition (2006)
- EVS, EVS-EN 1829-1:2021 High-pressure water jet machines, Safety requirements, Part 1: Machines
- Speck Triplex, Applications Pump Overview
- Speck Triplex, Systems-Units
- Speck Triplex, Model Series P
- Speck Triplex, Hot Water-Versions
- Speck Triplex, Special-Versions (special seals)
- Speck Triplex, Valves
- Speck Triplex, Accessories
- Ultra Controlo, Industrial 2026 catalogue, pp. 10 and 22
Ultra Controlo figures come from its technical datasheets. Third-party facts were read at the source on the date shown.