Industry
What is a high-pressure plunger pump and how does it work?
Short answer
As the background of US Patent 7,951,226 (2011) describes it, a plunger pump is a reciprocating positive-displacement pump in which a smooth plunger slides through stationary packing: the back stroke draws liquid in through a suction valve, and the forward stroke pushes it out through a discharge valve.
How the pumping cycle works
The patent background divides the pump into a fluid end, the portion that handles the liquid, and a power end, in which the rotating motion of the crankshaft is converted to a reciprocating motion through connecting rods and crossheads. Each plunger works in a pumping chamber with a suction valve and a discharge valve, usually spring-loaded check valves. When the plunger withdraws, the chamber volume increases and the suction valve opens to draw liquid from the low-pressure side; when the plunger is pushed in, the volume decreases and the discharge valve opens to deliver the liquid to the high-pressure side.
The same text separates plunger pumps from piston pumps by where the seal sits: a plunger moves past stationary packing, whereas a piston carries its packing with it. It also classifies pumps by the number of plungers, so that a pump with three plungers is commonly called a triplex pump, and it names a satisfactory seal for the plunger as a major problem of positive-displacement pumps, especially high-pressure ones. See plunger pump or piston pump.
What positive displacement means for the installation
The US Department of Energy pumping sourcebook (2nd edition, 2006, written with the Hydraulic Institute) explains that positive displacement pumps have a fixed displacement volume, so their flow is directly proportional to speed, while the pressure they generate is determined by the system's resistance to that flow. It lists high-pressure, low-flow duty among the cases where these pumps are typically more appropriate than centrifugal pumps.
The sourcebook adds three practical points. Because positive displacement pumps push fluid into the discharge line irrespective of backpressure, they are usually installed with pressure relief valves. Their flow typically pulsates, and the resulting vibration can be dampened with accumulators. And the mating surfaces of the internal valves of many reciprocating pumps wear and need periodic replacement.
Pressures and liquids in one manufacturer's range
Speck Triplex, a high-pressure partner brand of Ultra Controlo, publishes model tables for its own plunger pumps. Four examples from its P series:
| Model | Max. flow (l/min) | Max. pressure (bar) | Power (kW) | Recommended unloader |
|---|---|---|---|---|
| P11/3-200 | 3.1 | 200 | 1.3 | UL180 |
| P52/12-1000 | 12.8 | 1,000 | 26.2 | UL50/1000 |
| P55/18-1200 | 18.3 | 1,200 | 42.5 | none listed |
| P80/400-140 | 400 | 140 | 106 | none listed |
The manufacturer describes the standard P series as suitable for clean water and other non-aggressive or non-abrasive media with a specific weight similar to water, and says that before any other medium is pumped, suitability must be checked against pump performance and temperature. Besides the standard pumps it offers stainless steel versions, R in AISI 303 and RE in AISI 316 Ti, and special seals such as Viton, Teflon and FFKM. It says it produces pressure and discharge valves at its works to suit pump performances.
Ultra Controlo distributes and services Speck Triplex high-pressure pumps in Portugal as a partner brand, and its UltraCare programme covers preventive and corrective maintenance, original spare parts and emergency support for partner-brand equipment.
More questions
What is a triplex plunger pump?
The background of US Patent 7,951,226 says a pump having three plungers or pairs of opposed plungers is commonly referred to as a triplex pump.
Why does a plunger pump need a relief or unloader valve?
The DOE pumping sourcebook (2006) explains that positive displacement pumps push fluid into the discharge line irrespective of backpressure, so they are usually installed with pressure relief valves.
Which liquids can a standard plunger pump handle?
Speck Triplex gives clean water and other non-aggressive or non-abrasive media with a specific weight similar to water for its standard P series; any other medium has to be checked first.
Sources
- US Patent 7,951,226 B2 (published 31 May 2011), Background
- US Department of Energy and Hydraulic Institute, Improving Pumping System Performance: A Sourcebook for Industry, 2nd edition (2006)
- Speck Triplex, Model Series P
- Speck Triplex, R-Versions
- Speck Triplex, RE-Versions
- Speck Triplex, Special-Versions (special seals)
- Speck Triplex, Valves
- Ultra Controlo, Industrial 2026 catalogue, pp. 10 and 22
Ultra Controlo figures come from its technical datasheets. Third-party facts were read at the source on the date shown.
Related
- ComparisonsPlunger pump or piston pump: what is the difference?
- AnswersWhich high-pressure pumps are used for industrial cleaning?
- IndustrySpeck Triplex high-pressure plunger pumps
- IndustrySpeck Triplex spare parts and seals in Portugal
- IndustrySpeck Triplex high-pressure cleaning accessories and valves