Industry
Plunger pump or piston pump: what is the difference?
Plunger pump or piston pump: what is the difference at high pressure?
Short answer
The background of US Patent 7,951,226 (2011) states that a plunger pump differs from a piston pump in where the seal sits: a plunger moves past stationary packing, whereas a piston carries its packing with it. Both are reciprocating positive-displacement pumps.
Where the seal is
In the patent's description, a piston is a cylindrical body on a rod that usually has grooves holding rings, which seal against the smooth wall of the cylinder, or a replaceable liner, as the piston reciprocates. A plunger is a smooth rod attached to a crosshead; its sealing rings are stationary and the plunger slides within them. The cylinder of a plunger pump typically has two bores, a plunger bore and an axially aligned, larger packing bore that holds the packing around the plunger.
| Feature | Plunger pump | Piston pump |
|---|---|---|
| Moving part | Smooth rod (plunger) attached to a crosshead | Cylindrical body (piston) attached to a rod |
| Seal | Stationary packing; the plunger slides through it | Rings in grooves on the piston, moving with it |
| Sealing surface | Outer surface of the plunger | Cylinder wall or replaceable liner |
What they have in common
The patent treats plunger and piston pumps as the two types of reciprocating power pump, both of which can be single or double acting, and classifies them by the number of plungers or pistons. The US Department of Energy pumping sourcebook (2nd edition, 2006) describes positive displacement pumps as squeezing an amount of fluid equal to the displacement volume with each piston stroke, so that flow is directly proportional to speed and pressure is determined by the system's resistance. It notes that such pumps push fluid into the discharge line irrespective of backpressure and are usually installed with pressure relief valves, and that their flow typically pulsates.
The plunger design in one manufacturer's range
Speck Triplex publishes its P series of high-pressure plunger pumps, which includes, for example, the P55/18-1200, listed at a maximum of 18.3 l/min and 1,200 bar.
Its application table for the plunger pumps names central cleaning systems in dairies and slaughterhouses, descaling in rolling mills and the steel industry, boiler feed water in steam and power plants, and water hydraulics for robots, presses and welders. These are the published ranges of one manufacturer, not general limits of the design.
Ultra Controlo distributes and services Speck Triplex high-pressure pumps in Portugal as a partner brand, and its UltraCare programme covers preventive and corrective maintenance, original spare parts and emergency support for partner-brand equipment.
More questions
Are plunger and piston pumps both positive displacement pumps?
Yes. The DOE pumping sourcebook (2006) classes piston pumps as positive displacement, and the background of US Patent 7,951,226 treats plunger and piston pumps as the two types of reciprocating power pump.
Sources
- US Patent 7,951,226 B2 (published 31 May 2011), Background
- US Department of Energy and Hydraulic Institute, Improving Pumping System Performance: A Sourcebook for Industry, 2nd edition (2006)
- Speck Triplex, Model Series P
- Speck Triplex, Applications Pump Overview
- Ultra Controlo, Industrial 2026 catalogue, pp. 10 and 22
Ultra Controlo figures come from its technical datasheets. Third-party facts were read at the source on the date shown.
Related
- AnswersWhat is a high-pressure plunger pump and how does it work?
- AnswersWhich high-pressure pumps are used for industrial cleaning?
- IndustrySpeck Triplex high-pressure plunger pumps
- IndustrySpeck Triplex NP series plunger pumps: flows, pressures, models
- IndustrySpeck Triplex spare parts and seals in Portugal