Medical gas library

Industry

Speck Pumpen (Circutec) side channel pumps with magnetic coupling

Speck Pumpen (Circutec) describes its side channel pumps as self-priming and able to convey entrained gas, particularly suited to conveying, filling and emptying under difficult physical conditions, for clean to lightly contaminated, water-like liquids without abrasive contamination or solids, at nominal pressure PN 40 (PN 100 on request).

What a side channel pump is, in the maker's words

The maker defines side channel pumps, also known as turbine pumps, as hydraulic continuous-flow machines and a sub-type of centrifugal pump, classed as hydrodynamic pumps. Its side channel pumps are modular multistage pumps in sectional design, with star and radial impellers that have relief bores to balance axial thrust. The maker says it completely revised the modular system of its SK and ASK model series in 2015. For side channel blowers, see side channel blowers in industry.

The magnetic coupling

The maker offers a wide range of magnetic couplings to match the operating point, with optional ceramic containment cans to avoid eddy-current losses, and says it manufactures its magnetic drives in-house. Its 2018 side channel pump brochure lists Hastelloy or ceramic separating cans, PN 40, for the magnetic coupling version, and its 2018 process industry brochure lists a magnetic coupling with start-up safety device. The small GY side channel pump, with a mechanical seal, completes the range at the low end.

Difficult suction and liquids near boiling point

For low inlet heads, the maker offers a combination pump with an NPSH pre-stage (ASK), meaning an additional radial impeller. It says side channel pumps with this pre-stage reach very good NPSH values, can be used with a low inlet head and are well suited to liquids close to their boiling point.

Liquids, materials and ratings

  • Liquids: condensate up to +180 °C, heat transfer oils from -100 °C to +350 °C, solvents, refrigerants and liquefied gases; other media on request.
  • Materials: stainless steel, bronze and spheroidal graphite cast iron.
  • Flanges to EN 1092, ANSI 300 lbs and ANSI 150 lbs.
  • Nominal pressure PN 40, PN 100 on request.
  • Maximum flow in the 2018 brochure: 35 m³/h at 50 Hz and 42 m³/h at 60 Hz.
  • Explosion protection: the 2018 process industry brochure lists ATEX II 2G and TA Luft for the SKM and ASKM series.

Where the maker uses them

The 2018 side channel pump brochure lists the delivery of salt water and fresh water in ships among the uses.

For liquids and heat transfer, the Ultra Controlo website says it distributes and services Speck Pumpen (Circutec) in Portugal, and lists peripheral and side channel pumps under that brand.

More questions

Can these side channel pumps handle solids?

The maker says its side channel pumps suit clean to lightly contaminated, water-like liquids without abrasive contamination or solid content.

What temperatures can they handle?

The maker gives condensate up to +180 °C and heat transfer oils from -100 °C to +350 °C.

Sources

Ultra Controlo figures come from its technical datasheets. Third-party facts were read at the source on the date shown.

Reviewed: · Ultra Controlo engineering · Markdown version

Related