Standards
ISO 12500: test methods for compressed air filters
ISO 12500 is a four-part ISO series of test methods for compressed air filters: Part 1 tests oil aerosol removal by coalescing filters, Part 2 hydrocarbon vapour adsorbent filters, Part 3 solid particulate removal and Part 4 water removal, according to the iso.org abstracts.
The four parts
| Part | What the iso.org abstract says it tests | Last reviewed and confirmed |
|---|---|---|
| ISO 12500-1:2007, Oil aerosols | Coalescing filters: effectiveness in removing oil aerosols and the pressure drop. Performance is presented as outlet oil aerosol concentration in milligrams per cubic metre under standard rating parameters. | 2020 |
| ISO 12500-2:2007, Oil vapours | Hydrocarbon vapour adsorbent filters: effectiveness in removing hydrocarbon vapours, identified as the adsorptive capacity and the pressure drop. Performance is presented as hydrocarbon-vapour capacity in milligrams. | 2017 |
| ISO 12500-3:2009, Particulates | A guide for choosing a method of determining the solid particulate removal efficiency rating, by particle size, of filters. The test is a type-test on filters as being representative of a range, with a fine filter range of 0.01 to under 5.0 μm and a coarse filter range of 5.0 to 40 μm. | 2020 |
| ISO 12500-4:2009, Water | The water-removal efficiency and operational pressure drop of any device designed for water removal from compressed air described as wall flow in accordance with ISO 8573-2. | 2017 |
Where it is asked for
In UNDP procurement, the REQ-OXY-001 V01 requirements for oxygen plants (effective 1 January 2025) list ISO 12500-4 in Table 1, on the row for the medical air compressor including air dryer, alongside ISO 7396-1 and ISO 8573-1.
Edition and status
On 18 November 2026 iso.org lists all four parts as published, and for each says the publication was last reviewed and confirmed in the year shown in the table, so that version remains current. Check iso.org before fixing an edition in a specification.
More questions
Which part of ISO 12500 tests water removal?
Part 4. According to its iso.org abstract, ISO 12500-4:2009 determines the water-removal efficiency and operational pressure drop of devices designed for water removal from compressed air.
Which part of ISO 12500 tests coalescing filters?
Part 1. According to its iso.org abstract, ISO 12500-1:2007 covers testing coalescing filters to determine their effectiveness in removing oil aerosols.
Sources
- ISO 12500-1:2007, Filters for compressed air, Test methods, Part 1: Oil aerosols (iso.org, opened 18 November 2026)
- ISO 12500-2:2007, Part 2: Oil vapours (iso.org, opened 18 November 2026)
- ISO 12500-3:2009, Part 3: Particulates (iso.org, opened 18 November 2026)
- ISO 12500-4:2009, Part 4: Water (iso.org, opened 18 November 2026)
- UNDP, REQ-OXY-001 V01, Technical & Regulatory Requirements for Oxygen Plants (effective 1 January 2025), Table 1 (PDF p. 6)
Ultra Controlo figures come from its technical datasheets. Third-party facts were read at the source on the date shown.