Medical gas library

Vacuum and AGSS

What types of industrial vacuum pumps exist?

What types of industrial vacuum pumps exist and what is each one used for?

Short answer

Elmo Rietschle makes industrial vacuum with liquid ring, rotary vane (oil-lubricated or dry), screw, claw, rotary lobe and side channel machines, and its website calls liquid ring pumps ideal for wet, vapour-laden gas and side channel blowers suited to high flow at moderate vacuum.

The US EPA guide WaterSense at Work (section 7.3, October 2012), written for commercial and institutional facilities, sorts vacuum pumps by how the seal is made. Dry pumps do not use water for the seal: they work with turbines (fans) or by positive displacement, such as vane, claw and piston pumps. Wet pumps use a closed impeller sealed with water or other lubricants such as oil, and the guide names the liquid ring pump as the most common wet type.

The technologies in one maker's range

Elmo Rietschle publishes a working principle and example vacuum figures for each technology. The examples below are the maker's figures for the named series.

Elmo Rietschle technology pages and Product Guide ER.BP.PG.EN.26.03; figures are for the series named.
TypeHow it works, according to the makerOil in the compression chamberExample the maker publishesUses the maker lists
Liquid ringAn eccentrically mounted impeller forms a liquid ring that seals the cells between the blades and carries the compression heat away through the operating liquidNo oil named; the operating liquid seals and coolsL-BV2 and L-BV5: suction pressure up to 33 mbarWet and vapour-rich processes; environmental engineering, food and beverage, lifting and handling, packaging, plastics
Rotary vane, oil-lubricatedPressure increase by volume reduction; oil is lubricant, sealing agent and cooling medium, and a de-oiling chamber separates the oil from the gasYesV-VCS: ultimate vacuum 0.5 mbar (abs.)Manufacturing processes, packaging and material handling
Rotary vane, dry-runningVanes compress air or gas without oil lubricationNoV-VTN: ultimate vacuum 150 mbar (abs.)Food processing and packaging, printing and woodworking, dust extraction, environmental engineering, drying
ScrewTwo parallel screw rotors, one with a right-hand and one with a left-hand thread, turn in opposite directions without friction and compress the gas axiallyDry in the S-VSI and IDS; oil-lubricated in the SVTS-VSI: end vacuum 0.08 mbar (abs)Food packaging and processing, chemical processing, electronics and semiconductors, automotive
ClawClaw rotors open and close the inlet and outlet channels and compress the gas internally, without contact and without a sealing fluidNo; seals separate the chamber from the gearboxC-VLU: as low as 30 mbar (abs.)Food and beverage, packaging, pneumatic conveying, printing and paper, woodworking, chemical processing
Side channelThe impeller sits on the motor shaft and accelerates the gas in the side channel by centrifugal force, without contactNo (dry-running)G-Series: volume flows up to 3,000 m³/hPneumatic conveying, drying and process air, vacuum lifting and handling, aeration and ventilation, packaging support

Elmo Rietschle says in its 2026 Product Guide that its screw pumps operate at any pressure between end vacuum and atmospheric pressure. Its rotary lobe pumps (R-VWP) are dry-running, with a compression chamber free of grease or oil and an oil-lubricated gear box and bearings, and the maker combines them as boosters with oil-lubricated vane or screw backing pumps when both high end vacuum and suction capacity are needed.

Pumps built into equipment

Thomas, another partner brand, positions its rotary vane pumps for OEM applications; its technology page lists gas sampling, gas detection, water analysis, inkjet printing and vacuum pick and place among the uses of its miniature rotary vane pumps.

Comparing datasheets

ISO 21360-1:2020, last confirmed by ISO in 2025, specifies three methods for measuring the volume flow rate of a vacuum pump and one method each for base pressure, compression ratio and critical backing pressure. Elmo Rietschle's V-VTN datasheet (D281) states that its curves and tables follow PNEUROP standards, with a tolerance of ±10 %, for a pump at normal operating temperature (1 bar(abs.) and 20 °C). See how to size a vacuum pump and what vacuum level a process needs.

Ultra Controlo distributes and services Elmo Rietschle vacuum pumps and blowers and Thomas pumps in Portugal as partner brands, and its UltraCare programme covers preventive and corrective maintenance, original spare parts and emergency support for partner-brand equipment.

More questions

Which vacuum pump handles wet or vapour-laden gas?

Elmo Rietschle calls liquid ring vacuum pumps ideal when process gases contain moisture, steam load or entrained condensate, and says dry-running screw or rotary vane pumps can suit a dry, well-defined gas stream.

Is an oil-free vacuum pump a separate technology?

Elmo Rietschle offers oil-free operation in several technologies: dry-running rotary vane, claw and dry screw pumps, and dry-running side channel blowers.

Sources

Ultra Controlo figures come from its technical datasheets. Third-party facts were read at the source on the date shown.

Reviewed: · Ultra Controlo engineering · Markdown version

Related