Medical gas library

Industry

Original or equivalent compressor spare parts: what to check

Short answer

The Compressed Air Challenge Fact Sheet #5 (May 2026) ties compressor consumables to the manufacturer's specifications: inlet filter cartridges, lubricant, lubricant filter and air lubricant separator are selected or replaced per those specifications, and only a lubricant meeting them should be used.

The reference is the manufacturer's specification

The basic maintenance checklist in Compressed Air Challenge (CAC) Fact Sheet #5 (May 2026) measures each consumable against the manufacturer's specifications:

  • Inlet filter cartridges: inspect and clean or replace per manufacturer specifications.
  • Compressor lubricant and lubricant filter: top off, replace and change per manufacturer specifications; select compressor and electric motor lubricant per manufacturer specifications.
  • Air lubricant separator on lubricant-injected rotary screw compressors: change per manufacturer specifications or when the pressure drop exceeds 10 psid, whichever is less.
  • Belts: check for wear and adjust tension per manufacturer specifications.

The 2016 DOE sourcebook gave the same instruction for reciprocating compressors: use the specified lubricant or consult the manufacturer for recommendations.

Warranty

Warranty conditions are set by each manufacturer. Gardner Denver's ESM/VS 55 to 75 brochure, for example, says its Protect 10 warranty covers the airend for up to 44,000 hours or 10 years, subject to terms and conditions. The 2016 DOE sourcebook warned that, on lubricant-free rotary screw compressors, work on the compressor stages and gearbox must be conducted by the manufacturer's personnel only, and that any work done by unauthorized personnel can render the manufacturer's equipment warranty null and void.

Filters: published ratings

For compressed air filters, Gardner Denver says its range provides clean, high-quality air as defined by ISO 8573-1:2010 and is certified by a third party under ISO 12500-1. Its 2026 brochure rates the G, H and V element grades by maximum remaining oil aerosol or oil content at 21 °C.

Parts in a public tender

In the Cogersa tender in Asturias (TED 14136-2026, published 9 January 2026, tenders due by 9 February 2026, closed), the buyer scored the discount offered on the manufacturer's tariff for lower-rotation spare parts as a quality criterion, alongside a price criterion for supplying higher-rotation spare parts.

Ultra Controlo distributes and services Gardner Denver in Portugal; see Gardner Denver compressor spare parts in Portugal.

More questions

Can unauthorised work affect a warranty?

The 2016 DOE sourcebook warned that, on lubricant-free rotary screw compressors, any work done by unauthorized personnel on the stages and gearbox can render the manufacturer's equipment warranty null and void.

What should an alternative lubricant meet?

CAC Fact Sheet #5 (May 2026) says only a lubricant meeting the manufacturer's specifications should be used.

Sources

Ultra Controlo figures come from its technical datasheets. Third-party facts were read at the source on the date shown.

Reviewed: · Ultra Controlo engineering · Markdown version

Related