Industry
Trim compressor
A trim compressor is the one compressor in a multi-compressor system that runs at part load to match demand while the others stay fully loaded; the US Department of Energy compressed air sourcebook (2016) says it is typically the unit with the best part load efficiency, such as a variable speed compressor.
Fact Sheet #6 of the Compressed Air Challenge (May 2026, Rev. 1) says all compressors that are on should run at full load, except for one unit for trimming. The US Department of Energy sourcebook (third edition, 2016) says that in systems of positive-displacement compressors, such as reciprocating and rotary screw, the best system efficiency occurs when all compressors are kept fully loaded except for one trim compressor, which is operated in some part-load fashion specific to the design of the machine.
The sourcebook adds that the trim compressor is typically the unit with the best part load efficiency, such as a variable speed compressor, or a unit with low unloaded power consumption. Fact Sheet #11 (May 2026, Rev. 01) uses the same word: centrifugal compressors can serve base-load operation, allowing other compressor types to be used as trim machines to meet peak demands.
How the machines are staged is described in how several compressors are controlled together. For the variable speed compressor as trim unit, see the speed range of a variable speed screw compressor and fixed speed or variable speed.
More questions
Why keep the other compressors at full load?
The sourcebook says that in systems of positive-displacement compressors the best system efficiency occurs when all compressors are kept fully loaded except for one trim compressor.
Sources
- US Department of Energy and Compressed Air Challenge, Improving Compressed Air System Performance: A Sourcebook for Industry, third edition (2016)
- Compressed Air Challenge, Compressed Air Systems Fact Sheet #6: Compressed Air System Controls (May 2026, Rev. 1)
- Compressed Air Challenge, Compressed Air Systems Fact Sheet #11: Proven Opportunities at the Component Level (May 2026, Rev. 01)
Ultra Controlo figures come from its technical datasheets. Third-party facts were read at the source on the date shown.