Vacuum and AGSS
Dry-running or oil-lubricated rotary vane vacuum pump?
Dry-running or oil-lubricated rotary vane vacuum pump: which one for which process?
Short answer
Elmo Rietschle says oil lubricates, seals and cools an oil-lubricated rotary vane pump and allows deeper vacuum, 0.5 mbar (abs.) on the V-VCS, while its dry-running pumps avoid oil maintenance for clean, dry operation, with 150 mbar (abs.) on the V-VTN.
| Aspect | Oil-lubricated (oil-sealed) | Dry-running |
|---|---|---|
| What the oil or vane does | Oil is lubricant, sealing agent and cooling medium, and carries away the heat of compression (Elmo Rietschle) | Vanes run without oil lubrication; oil-less designs use self-lubricating vanes (Elmo Rietschle, Thomas) |
| Ultimate vacuum, examples | V-VCS 0.5 mbar (abs.); V-VCB 2 mbar (abs.); V-VCX 3 mbar (abs.) | V-VTN 150 mbar (abs.); V-VTR operating range up to 200 mbar (abs.) |
| Exhaust | A de-oiling chamber filters the oil-gas mixture and separates oil particles from the gas | Designed to operate without oil lubrication (Elmo Rietschle) |
| Cooling | Oil/air heat exchanger on the V-VCS and V-VCX (datasheet D236) | Cooling air pathways and thermal separation of the suction and compression chambers |
| Wet gas | XD versions for high water vapour loads and solvents; the V-VCX has resin vanes and an adjustable gas ballast valve | Elmo Rietschle positions them for clean, dry, contamination-free operation |
| Routine care | Correct lubricant, level checks and scheduled oil replacement (Thomas); Elmo Rietschle offers service kits for early-life maintenance | No oil changes; vanes and filters are inspected and replaced (Thomas) |
| Uses the maker lists | Manufacturing processes, packaging and material handling; small vacuum packaging machines (V-VCB) | Food processing and packaging, printing and woodworking, dust extraction, drying; CNC routing and thermoforming (V-VTN) |
Why the oil matters
Elmo Rietschle describes oil-lubricated vane pumps as also known as oil-flooded or oil-sealed pumps, in which the oil makes the seal that allows deeper vacuum levels and carries away the heat of compression. The cost is oil handling: the gas passes a de-oiling chamber before it leaves, and Thomas lists the correct lubricant, level checks and scheduled oil replacement as maintenance for oil-lubricated designs. For food and pharmaceutical work, Elmo Rietschle sells ECO-LUBE, a synthetic lubricant developed to meet FDA 21 CFR 178.3570 and USDA H-1, alongside MULTI-LUBE, a mineral lubricant to DIN 51506 group VCL.
Why dry-running
Elmo Rietschle says the oil-free design of its dry-running vane pumps eliminates maintenance concerns related to oil and suits applications that need clean, dry and contamination-free operation. The trade-off in its own data is vacuum: 150 mbar (abs.) ultimate for the V-VTN against 0.5 mbar (abs.) for the oil-lubricated V-VCS. Dry vanes wear: Thomas says its PICOLINO VTE graphite vanes have a low but permanent wear rate, that for clean air they should be checked at the latest after 4000 running hours and then every 1000 hours, and that they are replaced as a complete set.
Which one for which process
- Deep vacuum, or gas with some contaminants: Elmo Rietschle says oil-lubricated pumps offer high performance and can handle certain contaminants.
- Oil must not reach the product: the maker says oil-free pumps suit applications where oil-free operation is critical, such as the pharmaceutical or food industries.
- High water vapour or solvents with an oil pump: XD versions, such as the V-VCX.
- Pressure and vacuum from one unit: dry-running pressure-vacuum models such as the V-KTR, with an operating range of -0.6 bar / +0.6 bar.
Ultra Controlo distributes and services Elmo Rietschle and Thomas rotary vane pumps in Portugal as partner brands, and its UltraCare programme covers preventive and corrective maintenance, original spare parts and emergency support for partner-brand equipment.
More questions
What does the de-oiling chamber of an oil-lubricated vane pump do?
Elmo Rietschle says the de-oiling chamber filters the oil-gas mixture and separates oil particles from the gas for clean operation: larger droplets are collected in an oil sludge recipient, and finer particles are separated through filter elements and reintroduced into the pump's oil circuit.
Do dry-running vane pumps need maintenance?
Yes: Thomas says vanes may need periodic inspection or replacement depending on operating conditions, and recommends replacing the intake filter of the PICOLINO VTE at least once per year.
Sources
- Elmo Rietschle, Rotary Vane Vacuum Pumps
- Elmo Rietschle, Oil-Lubricated Rotary Vane Pumps
- Elmo Rietschle, Oil Rotary Vane Pump V-VCS
- Elmo Rietschle, Oil-Lubricated Rotary Vane Pump V-VCX
- Elmo Rietschle, Compact Rotary Vane Pump V-VCB
- Elmo Rietschle, V-Series brochure (PDF)
- Elmo Rietschle, Datasheet D236 V-VCS / V-VCX 200, 300 (PDF)
- Elmo Rietschle, Dry Running Rotary Vane Pumps
- Elmo Rietschle, Dry Running Rotary Vane Pump V-VTN
- Elmo Rietschle, Dry running rotary vane pump V-VTR
- Elmo Rietschle, FAQ
- Thomas, Rotary Vane Pumps and Compressors
- Thomas, PICOLINO VTE Series, operating instructions manual (PDF)
- Ultra Controlo, Industrial 2026 catalogue, pp. 10 and 22
Ultra Controlo figures come from its technical datasheets. Third-party facts were read at the source on the date shown.