Oxygen and PSA
Oxygen flow converter: L/min, m³/h, m³ per day and kg
WHO's 2020 interim guidance converted oxygen flows by multiplying L/min by 60 to get litres per hour and dividing by 1,000 to get m³/h. The converter below also gives m³ per day, kilograms of oxygen at 1.428 g per litre at 0 °C and 1 atm (Open Critical Care) and the equivalent in J cylinders.
The factors it uses
| From | To | Factor | Source |
|---|---|---|---|
| L/min | L/h | × 60 | WHO interim guidance (4 April 2020) |
| L/h | m³/h | ÷ 1,000 | WHO interim guidance (4 April 2020) |
| m³/h | m³ per day | × 24 | Open Critical Care |
| Litres of oxygen at 0 °C and 1 atm | grams | × 1.428 | Open Critical Care |
| Litres of oxygen at 22 °C | grams | × 1.322 | Open Critical Care |
| Litres per day | J cylinders per day | ÷ 6,800 | WHO and UNICEF (2019), nominal content of a J cylinder |
Open Critical Care works out the mass from the ideal gas law: one mole of O2 weighs 32 g and occupies 22.4 L at standard temperature and pressure, which it takes as 0 °C and 1 atm, giving 1.428 g per litre; at 22 °C a mole occupies 24.2 L, giving 1.322 g per litre.
Check the units on the datasheet
WHO's Foundations of medical oxygen systems (2023) explains that Nm³/h refers to a reference condition of temperature and pressure, that capacity is sometimes expressed instead in Sm³/h, based on standard reference conditions, and that the unit used determines the actual gas volume produced. The converter treats m³/h and Nm³/h as the same number, so check which unit each datasheet uses before comparing plants.
The kilograms are for oxygen (O2). Oxygen 93 from a PSA plant contains 90.0% to 96.0% oxygen, the rest mainly argon and nitrogen, according to the International Pharmacopoeia (13th edition, 2025).
Published pairs to compare with the converter, as printed in their sources: WHO (2023) Table 2.1 lists 16 Nm³/h as 266 L/min, and the ULTRAOX ST datasheet lists model 1640 at 164 m³/h and 2,734 L/min.
More questions
Is Nm³/h the same as m³/h?
Not always. WHO (2023) explains that Nm³/h refers to a reference condition of temperature and pressure and that some datasheets use Sm³/h instead, so the same number can mean a different volume of gas.
Why show J cylinders per day?
To express a daily volume as a number of cylinders. The WHO-UNICEF table (2019) gives a J cylinder a nominal 6,800 L of oxygen; HTM 02-01 (2026) lists 6,500 L usable for an oxygen J cylinder, based on a 1400 kPa changeover, so a count based on usable contents is a little higher.
Sources
- WHO, Oxygen sources and distribution for COVID-19 treatment centres, interim guidance (4 April 2020), Table 1
- WHO, Foundations of medical oxygen systems (17 February 2023), sections 2.1 and 2.5, Table 2.1
- Open Critical Care, Oxygen FAQ: How much does gaseous oxygen (O2) weigh?
- Open Critical Care, Oxygen FAQ: How do you calculate the conversion between a PSA plant's rate of oxygen production and cylinder volumes that can be filled?
- The International Pharmacopoeia, 13th edition (2025), Medicinal oxygen
- ULTRAOX ST datasheet, p. 5 (model table)
- WHO-UNICEF, Technical specifications and guidance for oxygen therapy devices (14 January 2019), Table 3.2
- NHS England, HTM 02-01 Part A (2026), paragraph 5.14 and Table 13
Ultra Controlo figures come from its technical datasheets. Third-party facts were read at the source on the date shown.
Related
- AnswersHow do you convert Nm³/h to litres per minute?
- ToolsHospital oxygen demand calculator, with the HTM 02-01 flows
- ToolsOxygen cylinder duration calculator
- AnswersWhat capacities do ULTRAOX plants cover?
- AnswersHow do you measure a hospital's actual oxygen use?
- ProductsULTRAOX ST: specifications and models